Description

• Material : Aluminum
• Max torque for ØA = 352 Nm
• Max torque for ØB = 352 Nm

Description

• Material: Aluminum
• Ø 76 mm
• Two thickness available (T = 3mm and T = 5 mm)
• Suitable for manual and automatic tool change

Description

• Material : Aluminum
• Max torque for ØA = 440 Nm

Description

• Material: Aluminum
• Ø 76 mm
• Two thicknesses available (3 and 5 mm)

Description

Manual Quick Change Adapter (QC-M-76) has been  designed to cover the gap between fully automated press lines using automatic tool change systems, such as the ABB QC-M-76, and semi-automatic lines, where the tool change is done by robot operator’s.

The Manual Quick Change Adapter (QC-M-76) is mainly made of molded and machined parts of aluminium

On top of the QC-M-76 there is a mounting area including threaded holes for bolting to the manipulator. When the QC-M-76 is to be mounted on a robot, an adapter plate has to be fitted between the robot and the QC-M-76.

When the mechanical closed is fixed, the locking handle is pulling the tooling shaft into the QC-M-76 inner cone. At the same time, the pneumatic components are connected to the valves.