Suction cup mounting

The TS 11 series compensated spring systems are recommended for horizontal handling of objects at different levels. The spring function also ensures that the gripping points are applied on the same plane when gripping with multiple suction cups.

Protected spring

The TS 11 series spring system can be fitted on all suction cups in group 1 (VP, VSA, VS, Ø5 to 25 mm) for IM21 and on suction cups in series VPG 5 to 20.

Applications

TS and YS series compensated spring systems are recommended for horizontal handling of parts at different levels. The spring function also ensures that the gripping points are applied on the same plane when gripping with multiple suction cups.

Suction cup mounting

Choose the spring system which corresponds to the suction cup reference.

Presentation

The system of 4 compensated springs is particularly recommended for horizontal handling requiring large diameter suction cups. The upper stainless steel springs act as dampers for all vertical movements. They compensate for different levels between the suction cups. The system of 4 compensated spring systems mounted in square gives the assembly a ball-joint effect.

Applications

The TSOP and TSOG series spring systems are anti-rotation spring systems. They are used for horizontal handling of parts at different levels. The anti-rotation function ensures that objects are always gripped in the same position.The TSOP range is designed for applications requiring very precise handling.The hexagonal rod prevents the suction cup from rotating.
Protected spring.

Applications

The L series extensions are used for gripping on various levels from the same installation plate. These extensions are adjustable to different heights. This system is especially useful for 2.5 bellows-type suction cups, as height adjustment is made easier by the deflection of the suction cup. Spring systems should be chosen, instead, for flat suction cups with low deflection.

Applications

This fittings are designed for installations with a large number of suction cups connected to the same vacuum generator (vacuum chamber technology), in particular for cases where there may be objects missing from the layer of objects to be handled. Using the nozzle inserts limits the loss of flow rate and allows for the optimization of the vacuum generator.

Caution: This type of inserts is not compatible for applications in dusty environments.