(65) 68913286 sales@dabtech.net
RETRACTABLE LOCATING PIN SZK 30

RETRACTABLE LOCATING PIN SZK 30

by | Sep 6, 2016 | Position & Clamp Cylinders, Tunkers

Products

[accordionmenu id="uniqued994e88" accordionmenu="6404"]

RETRACTABLE LOCATING PIN SZK 30

RETRACTABLE LOCATING PIN SZK 30

  • Automation Technology
  • Clamping Tehcnology

Pneumatic cylinders with a flat design & construction, multi-force cylinder with mechanic power transmission. guiding cylinders.

Retract cylinder with mounting hole on pistonrod for centering pins, compact housing of high strength aluminium material, drive via round cylinder Ø 30 for thrust and tensile forces of up to approx. 350/250 N, push rod secured against twisting in bronze bushing, integrated inductive sensors, combined stroke 20 mm, intermediate stroke lengths upon request.

Tractive force: 0.25 kN

Weight: 0.80 kg

Dimensions (L*W*H): 134.00 x 45.00 x 45.00 mm

SHOT PIN SAND

SHOT PIN SAND

by | Sep 6, 2016 | Shot Pins, Tunkers

Products

[accordionmenu id="uniqued994e88" accordionmenu="6404"]

SHOT PIN SAND

SHOT PIN SAND

Shot pins are used for fixing end positions of rotary tables, lifting units as to linear movement. The double-supported pinning axis is fully enclosed and constructed as a cylinder piston rod. The integrated mechanic limit switches, spring-loaded with positive drive, meet the standard safety regulations of the automotive industry.

Pneumatic shot pin pertaining to automotive standards with standard cylinder, guide block and safety switch. Housing in welded steel construction, pneumatic cylinder Ø 50 and 80, manual emergency oepration.

Dimensions (L*W*H): 410.00 x 327.00 x 172.50 mm

Vario Clamps – Waterproof V – WP

Vario Clamps – Waterproof V – WP

by | Sep 6, 2016 | Special Clamps, Tunkers

Products

[accordionmenu id="uniqued994e88" accordionmenu="6404"]
VARIO CLAMPS - WATERPROOF V - WP

Vario Clamps – Waterproof V – WP

  • Automation Technology
  • Clamping Technology

E-Clamp, Expansion Mandrels, Swivelling Clamps and Accessories.

Special water-protected clamp according to IP65 with toggle joint mechanism and continuously adjustable opening angle, over-centre-lock. Encapsulated two-part special housing, anodised, bearing with external seal, oval-shaped cylinder in the sizes 50, 63, 80. Fork shaped clamp arm with corrosion prevention agent chromium nitride, standard hole pattern for adapting contour blocks. Continuously adjustable opening angle 45°-135°. End position sensing forward/backward with sealed M12 bullet connector. Pneumatic supply connection for sealing air (0,2-0,4 bar) for additional securing of the mechanical components.

Clamping moment: 160.00 Nm

Weight: 4.30 kg

Dimensions (L*W*H): 345.00 x 114.00 x 48.00 mm

PG 32 AS

PG 32 AS

by | Sep 6, 2016 | Pneumatic Gripper Clamps, Tunkers

Products

[accordionmenu id="uniqued994e88" accordionmenu="6404"]

PG 32 AS

PG 32 AS

  • Automation Technology
  • Clamping Technology

Pneumatic gripper clamps with toggle and curve-driven lever mechanisms

Compact gripper with curve-driven lever mechanism, two synchronally driven gripper arms, robust housing of high-strength aluminium material with integrated pneumatic cylinder, gripper arms in steel construction with curved link and adaptor for gripper jaws, multiple mounting options on the housing, optional: integrated closed and opened position sensing (T12), sensor for component indentification, dead stops at the sides for work piece positioning.

Weight: 0.90 kg

Dimensions (L*W*H): 158.00 x 45.00 x 45.00 mm

Underbody Clamp

Underbody Clamp

by | Sep 6, 2016 | Pin Clamps, Tunkers

Products

[accordionmenu id="uniqued994e88" accordionmenu="6404"]

Automation Technology

Underbody Clamp

  • Automation Technology
  • Clamping Technology

Pin clamps offer a clmaping function “below component level” for clamping in sheet apertures, centring of retainers or borings. The alternative equipment with fully immersing swivelling clamping hook or clamping hook guided in a centring mandrel facilitates an extremely compact installation design, as the tool disappears below the component level. All pin clamps are supplied in fully enclosed construction and feature an integrated end position sensing in cartridge design.

Clamp with retractable centring pin and integrated retracting hook for centring and clamping operations in workpiece openings. Centring pin according to requirement in the diameters from 20-40 mm, complete component release due to retractable pin, self-locking toggle-joint mechanism, retracting hook and centring pin each driven by a pneumatic cylinder. Encapsulated housing in aluminium construction with hole pattern for mounting purposes to the left and right. Option: – Inductive sensing, weld field immune for opened and closed position (T12).

Dimensions (L*W*H): 319.50 x 95.00 x 95.00 mm

Industrial Standard

Industrial Standard

by | Sep 5, 2016 | Manual Clamps, Tunkers

Products

[accordionmenu id="uniqued994e88" accordionmenu="6404"]

Industrial Standard

Industrial Standard

Horizontal and vertical clamps in galvanised steel plate versions for professional applications in line production, i.e. body in white in vehicle construction.

For more information or enquiry, kindly e-mail to enquiry@dabtech.net

Horizontal and vertical clamps in galvanised steel plate versions for simple to medium clamping jobs